MUFFLER SHIELD KIT
J065382017-08-23
GENERAL
Kit Number
65400457, 65400461
Models
This kit fits over Screamin' Eagle® 3.5 inch Street Cannon Mufflers.
INSTALLATION
1.
Note the position and direction of the original equipment (OE) clamp screws securing the exhaust shields to the exhaust pipe. Remove OE shields and clamps from mufflers. Save clamps for installation.
2.
See Figure 1. Attach clamps to new shields and align shields around mufflers.
1Muffler
2Shield clamp
3Muffler shield
Figure 1. Muffler shield
3.
Tighten clamps evenly. Tighten.
Torque: 2.3–4.6 N·m (20–41 in-lbs)
KIT CONTENTS
Table 1. Kit Contents
Description (Quantity)
Part Number
Muffler shield, satin black (kit 65400457)
65400451
Muffler shield, denim black (kit 65400461)
65400272