Coolant Hose Cover Kit
J059232014-06-02
GENERAL
Kit Number
26900107, 26900108
Models
For model fitment information, see the P&A Retail Catalog or harley-davidson.com (English only).
WARNING
Rider and passenger safety depend upon the correct installation of this kit. If the procedure is not within your capabilities or you do not have the correct tools, have a Harley-Davidson dealer perform the installation. Improper installation of this kit could result in death or serious injury. (00308b)
Kit Contents
See Figure 2 and Table 1.
INSTALLATION
1.
See Figure 1. Remove output sprocket cover screw (7) and washer (5). Remove washer from screw.
2.
Remove ignition coil cover (8).
3.
Remove two inner ignition coil bracket screws (1).
4.
Slide coolant hose cover (2) under ignition coil bracket. Cover fits over coolant hoses.
5.
Loosely install ignition coil bracket screws.
6.
Place washer removed in step 1 between coolant hose cover tab (3) and sprocket cover (4).
7.
Place D-washer (6) on sprocket cover screw.
8.
Loosely install screw and D-washer.
9.
Tighten sprocket cover screw to 9–11 N·m (80–97 in-lbs).
10.
Tighten ignition coil bracket screws to 22.5–27.5 N·m (17–20 ft-lbs).
11.
Install ignition coil cover.
1Ignition coil bracket screw
2Hose cover
3Tab
4Sprocket cover
5Washer
6D-washer
7Sprocket cover screw
8Ignition coil cover
Figure 1. Hose Cover
SERVICE PARTS
Figure 2. Service Parts
Table 1. Service Parts
Item
Description (Quantity)
Part Number
1
Hose cover
Not Sold Separately
2
D washer
10600033
Items mentioned in text, but not included in kit.
A
Stock washer