WINDSHIELD TRIM MIRROR KIT
J059372014-08-12
GENERAL
Kit Number
56000091
Models
For model fitment information, see the P&A retail catalog or the Parts and Accessories section of www.harley-davidson.com (English only).
Installation Requirements
Separate purchase of a Windshield Trim Mirror Mount Kit (Part No. 57400254) is required for proper installation of this kit.
Kit Contents
See Figure 1 and Table 1.
INSTALLATION
1.
Install the Windshield Trim Mirror Mount Kit (Part No. 57400254) per the instructions in that kit.
2.
Get a mirror and set screw from this kit.
3.
Thread the mirror into the correct support stalk. Tighten the mirror stud with an open-end wrench. Align the wrench flats near parallel to the bottom face of the support.
4.
Insert a set screw into the stalk. Tighten against the mirror stud to 2.4–2.7 N·m (21–24 in-lbs).
5.
Repeat steps for the opposite side.
SERVICE PARTS
Figure 1. Service Parts, Windshield Trim Mirror Kit
Table 1. Service Parts
Item
Description (Quantity)
Part Number
1
Mirror (left)
Not sold separately
2
Mirror (right)
Not sold separately
3
Set screw, hex drive, cup point (2)
3318