VINTAGE WHITE PASSENGER FOOTBOARD INSERTS
J059762014-11-18
GENERAL
Kit Number
50500416
Models
For model fitment information, see the P&A Retail Catalog or the Parts and Accessories section of www.harley-davidson.com (English only).
Kit Contents
This kit contains two footboard inserts.
There are no service parts available with this kit.
INSTALLATION
Remove Existing Footboard Inserts
1. See Figure 1. Apply liquid dishwashing soap to the footboard insert rubber beads (1) protruding through the bottom of the footboard.
Figure 1. Passenger Footboard Insert, Vintage White
2. Pry the footboard insert out from the top of the footboard to remove the insert.
Install New Footboard Inserts
  1. Apply liquid dishwashing soap to the new footboard insert rubber beads.
  2. Place the footboard insert into position on the footboard. Use a pliers to pull each rubber bead into its footboard hole until the beads protrude through the footboard.
  3. Repeat the above steps for the remaining footboard insert.
In Use
If your white footboards become discolored, the use of a clean white cloth and common dish soap or Harley-Davidson Wheel and Tire Cleaner (Part No. 93600024) to clean the footboards will aid in removing any discoloration or stains. Rinse with clean water and dry thoroughly.