AIR CLEANER COVER INSERT
J057752013-11-01
GENERAL
Kit Numbers
61300219, 61300220, 61300221, 61300222
Models
For model fitment information, see the P&A Retail Catalog or the Parts and Accessories section of www.harley-davidson.com (English only).
Additional Parts Required
Separate purchase of LOCTITE® 243 MEDIUM STRENGTH THREADLOCKER AND SEALANT (blue) (part no. 99642-97) or equivalent is required for proper installation of this kit.
Kit Contents
See Figure 1 and Table 1.
PREPARATION
  1. See Figure 1. Remove original equipment (OE) insert (A or B) from the air cleaner cover.
    1. Style "A": Pull on front edge of trim to release 3M Dual Lock Reclosable Fastener. Do not remove fastener from the air cleaner cover.
    2. Style "B": Push a thin-blade putty knife between trim and air cleaner cover while pulling trim away from cover. Remove all tape and adhesive residue from the air cleaner cover.
  2. Remove screw (C). Air cleaner cover and gasket do not require removal.
INSTALLATION
1.
Style "A":The original Dual Lock fastener is compatible with the new components.
2.
Style "B":
a.
See Figure 1. Thoroughly clean area (D) with a 50:50 mix of rubbing alcohol and water. Allow to dry completely.
b.
Leave Dual Lock fastener halves attached. Remove tape protecting adhesive.
c.
Visually align trim plate (3) with cover and press firmly in fastener area (D) to secure. Hold for 30 seconds.
d.
Remove trim plate.
3.
Apply LOCTITE 243 MEDIUM STRENGTH THREADLOCKER AND SEALANT (blue) to threads of screw (C).
NOTE
Verify that seal (F) has not become dislodged.
4.
Install trim plate (3) and gasket (4) with original screw (C). Tighten to 4.1–6.8 N·m (36–60 in-lbs). Press firmly in area of Dual Lock fastener (D) to secure.
5.
Install the decorative insert (2) with screws (1). Tighten securely. Press firmly on insert in area of Dual Lock fastener (arrow) to secure.
SERVICE PARTS
Figure 1. Service Parts: Air Cleaner Trim Kit
Table 1. Service Parts: Air Cleaner Trim Kit
Item
Description (Quantity)
Part Number
1
Insert screw, 8-36 x 1/4, Torx® (2)
10500039
2
Decorative insert
Not Sold
Separately
3
Trim plate
Not Sold
Separately
4
Gasket
Not Sold
Separately
Items mentioned in text but not provided.
A
Original trim retained with Dual Lock fastener
B
Original trim retained with double-sided tape
C
Screw
D
New Dual Lock fastener
E
Air cleaner cover assembly
F
Seal