STREET SEAT KIT
J058922013-08-09
GENERAL
Kit Number
52000123, 52000124, 52000168
Models
For model fitment information, see the P&A Retail Catalog or the Parts and Accessories section of www.harley-davidson.com (English only).
Kit Contents
See Figure 3 and Table 1.
WARNING
Rider and passenger safety depend upon the correct installation of this kit. If the procedure is not within your capabilities or you do not have the correct tools, have a Harley-Davidson dealer perform the installation. Improper installation of this kit could result in death or serious injury. (00308b)
WARNING
Do not install these seat kits on motorcycles that are not equipped with an appropriate grab strap and passenger footpegs. If footpegs and grab strap are not installed, passenger could fall from moving motorcycle or grab onto operator, causing loss of control and death or serious injury. (00410b)
INSTALLATION
1.
See Figure 1. Remove seat.
a.
Remove seat retention screw (3).
b.
Slide seat (1) rearward to release from seat retention tab (2).
c.
Slide seat forward above fuel tank.
d.
Pull seat forward through seat strap (4).
2.
See Figure 2. Remove screws and washers (2) and grab strap (1).
NOTE
Solo seat kits do not include a grab strap. After installing a solo seat kit, remove passenger foot pegs.
3.
New Two-Up Seat: Install new grab strap.
a.
Kit 52000123: Select hole (4). Align with mounting holes. Secure with screws and washers (2).
b.
Kit 52000124: Select hole (3). Align with mounting holes. Secure with screws and washers (2).
c.
Tighten screw to 9–11 N·m (80–97 in-lbs).
4.
Install seat.
a.
Insert rear of seat (1) through seat strap (4).
b.
Slide seat forward and on to seat retention tab (3).
c.
Install seat retention screw (3). Tighten to 2.3–4.5 N·m (20–40 in-lbs).
WARNING
After installing seat, pull upward on seat to be sure it is locked in position. While riding, a loose seat can shift causing loss of control, which could result in death or serious injury. (00070b)
5.
Check that seat is installed securely.
1Seat
2Tab
3Seat retention screw
4Grab strap
Figure 1. Seat
1Grab strap
2Screw and washer (2)
3Hole for kit 52000124
4Hole for kit 52000123
Figure 2. Grab Strap
SERVICE PARTS
Figure 3. Service Parts: Street Seat Kit
Table 1. Service Parts
Item
Description (Quantity)
Part Number
1
Seat
Not Sold Separately
2
Grab strap (included in kits 52000123 and 52000124)
52400105