MOLDED GLOVE BOX LINER KIT
J058952013-10-05
GENERAL
Kit Number
57100270
Models
For model fitment information, see the P&A Retail Catalog or the Parts and Accessories section of www.harley-davidson.com (English only).
Kit Contents
Table 1. Kit Contents
Description (Quantity)
Part Number
Glove box liner, R.H.
Not Sold Separately
Glove box liner, L.H.
Not Sold Separately
There are no Service Parts available with this kit.
INSTALLATION
NOTE
The molded glove box liners are labeled (Left and Right) for easier identification.
1.
See Figure 1. Open glove box door.
Figure 1. Push top of door to open
2.
Wash the inside of the glove box with warm, soapy water. Rinse and dry thoroughly.
Figure 2. Glove Box Door Open
Figure 3. Install Liner into Glove Box (right side shown)
3.
See Figure 3. Compress liner with fingers and press into glove box.
4.
Apply pressure on liner surfaces until it fits snugly inside glove box.
5.
Close glove box door.
6.
Repeat for molded glove box liner on opposite side.