MUFFLER END CAP KIT
J059132013-11-01
GENERAL
Kit Numbers
65100056
Models
For model fitment information, see the P&A Retail Catalog or the Parts and Accessories section of www.harley-davidson.com (English only).
Kit Contents
See Figure 1 and Table 1.
INSTALLATION
1.
See Figure 1. Remove the original muffler end cap. Retain the three clip nuts (A). See the service manual.
2.
Slide the three clip nuts (A) onto the bosses of the end cap mounting ring (2).
3.
Install mounting ring into end cap (1). Align holes.
4.
Align holes in end cap (1) with those in muffler (B). Slide end cap into muffler body.
5.
Install the three screws (3). Tighten securely.
NOTICE
Wipe all fingerprints off of exhaust system components after installation and before starting engine. Oil from hands can leave permanent marks on exhaust system finish. (00346a)
6.
Wipe end cap and muffler to remove fingerprints and any other oils or dirt.
SERVICE PARTS
Figure 1. Kit Contents: Muffler End Cap
Table 1. Kit Contents
Item
Description (Quantity)
Part Number
1
End cap
not serviced separately
2
Mounting ring
not serviced separately
3
Screw M6 X 1.0 X 14 (3)
not serviced separately
Items mentioned but not included in kit
A
Clip nuts
10400025
B
Muffler