AIR CLEANER COVER TRIM KIT
J059072018-01-16
GENERAL
Kit Numbers
29400343, 61300227 , 61300228 , 61300229 , 61300520
Models
For model fitment information, see the P&A retail catalog or the Parts and Accessories section of www.harley-davidson.com (English only).
Kit Contents
See Figure 3 and Table 1.
REMOVAL
WARNING
To prevent accidental vehicle start-up, which could cause death or serious injury, remove main fuse before proceeding. (00251b)
  1. See the owner's manual. Remove main fuse.
  2. NOTE
    The original equipment (OE) cover trim is held in place with adhesive. Avoid damaging air cleaner cover during removal.
  3. See Figure 1. Carefully pry off existing cover trim (2). Clean any residual adhesive from the air cleaner cover (3).
  4. Remove air cleaner cover screw (1). Retain screw for installation.
INSTALLATION
1.
See Figure 2. Secure bracket (4) and air cleaner cover (5) with cover screw (3) removed earlier. Align one bracket spoke at the 12 o'clock position. Tighten screw.
Torque: 6–8 N·m (53–71 in-lbs) Hex socket screw
2.
Install cover trim (2) with five screws (1). Tighten screws.
Torque: 3.4–4.2 N·m (30–37 in-lbs) Hex socket screw
3.
See the owner's manual. Install main fuse.
1Screw
2Cover trim
3Air cleaner cover
Figure 1. Remove OE Trim
1Screw (5)
2Cover trim
3Screw
4Bracket
5Air cleaner cover
Figure 2. Install Cover Kit
SERVICE PARTS
Figure 3. Service Parts: Air Cleaner Cover Kit
Table 1. Service Parts
Item
Description (Quantity)
Part Number
1
For Kit 61300227 , 61300228 , 61300229 , 61300520
TORX button head cap screw (5)
94590-98
For Kit 29400343
Screws, torx, black oxide (5)
10200435
2
Cover trim
Not sold separately
3
For Kit 61300227 , 61300228 , 61300229 , 61300520
Bracket
61300240
For Kit 29400343
Bracket
61300519