AIR CLEANER COVER INSERT
J033142018-01-16
GENERAL
Kit Numbers
27957-10, 27961-10, 29416-04, 29400341, 61300055, 61400020, 61400051, 61400165, 61400169
Models
For model fitment information, see the P&A Retail Catalog or the Parts and Accessories section of www.harley-davidson.com (English only).
WARNING
Rider and passenger safety depend upon the correct installation of this kit. If the procedure is not within your capabilities or you do not have the correct tools, have a Harley-Davidson dealer perform the installation. Improper installation of this kit could result in death or serious injury. (00308b)
NOTE
A service manual for your model motorcycle is available from your Harley-Davidson Dealer.
Kit Contents
See Figure 2 and Table 1.
INSTALLATION
Figure 1. Remove Screws and Insert
1.
See Figure 1. Remove original equipment (OE) screws and insert from front of air cleaner cover.
2.
See Figure 2. Match the holes and place the kit insert (1) on the front of the air cleaner cover.
3.
Install the insert with screws (2) or (3), washers (4) and spacers (5) (if not attached to the insert).
NOTE
The longer screws (2) are installed when using the Screamin' Eagle Sportster High-Flow Air Cleaner Kit (Harley-Davidson Part No. 29042-04). The shorter screws (3) are installed with the stock air cleaner assembly.
4.
Tighten screws.
Torque: 3.4–6.8 N·m (30–60 in-lbs) air cleaner
SERVICE PARTS
Figure 2. Service Parts: Skull Air Cleaner Insert Shown
Table 1. Service Parts: Air Cleaner Cover Insert
Item
Description (Quantity)
Part Number
1
Air cleaner insert
Not Sold Separately
2*
For Kit 27957-10, 27961-10, 29416-04, 29400341, 61400020, 61400051, 61400165, 61400169
Screw (2)
94334-91T
For Kit 29400341
Screw, socket head, black (2)
10200494
3*
For Kit 27957-10, 27961-10, 29416-04, 29400341, 61400020, 61400051, 61400165, 61400169
Screw (2)
94331-91T
For Kit 29400341
Screw, socket head, black (2)
10200496
4
For Kit 27957-10, 27961-10, 29416-04, 29400341, 61300055, 61400020, 61400051, 61400165, 61400169
Washer (2)
Not Sold Separately
For Kit 29400341
Washer, flat, black oxide (2)
10300124
5
Tapered spacer (2)
Not Sold Separately
* Note: Kit 61300055 uses unique screws (2 and 3) and are not sold separately.