WINDSHIELD TRIM
J057562018-01-16
GENERAL
Kit Number
61400224, 61300358, 61400593
Models
For model fitment information, see the P&A Retail Catalog or the Parts and Accessories section of www.harley-davidson.com (English only).
WARNING
Rider and passenger safety depend upon the correct installation of this kit. If the procedure is not within your capabilities or you do not have the correct tools, have a Harley-Davidson dealer perform the installation. Improper installation of this kit could result in death or serious injury. (00308b)
Kit Contents
See Figure 1 and Table 1.
INSTALLATION
1.
See Figure 1. Remove three original equipment (OE) screws and washers. Discard.
2.
Install windshield trim (6), washer (2) and center screw (5). Do not tighten at this time.
3.
Center the windshield trim on the fairing and install end screws (1) and washers (2).
4.
NOTE
Do not over-tighten screws.
Tighten center screw.
Torque: 2.8–3.4 N·m (25–30 in-lbs) center screw
5.
Tighten end screws.
Torque: 2.8–3.4 N·m (25–30 in-lbs) center screw
SERVICE PARTS
Figure 1. Windshield Trim
Table 1. Service Parts Table
Item
Description (Quantity)
Part Number
1
Screw, Stainless (2)
4976
Screw, Black (2)
10200679
2
Washer, Stainless (3)
6383
Washer, Black (3)
10300156
3
Pad (2)
6549
4
Pad (3)
10300036
5
Screw, Stainless
10500034
Screw, Black
10200678
6
Windshield trim
Not Sold Separately