Bracket Mounting Kits
J003702006-06-16
GENERAL
Kit Number
61740-90T, 61741-93T, 61742-93T, 61780-91T, 61781-91T, 61782-91T, 61783-92T, 61784-92T, 61785-92T, and 61840-94T
Kit Contents
There are no Service Parts available with this kit.
Models
This kit fits the following models:
Table 1. Models
Kits | Models |
|---|---|
61740-90T | This bracket kit is designed to mount part number 61776-61T "Star" Gas Tank Medallions to Harley-Davidson Fat-Bob® style gas tanks. |
61741-93T | This bracket kit is designed to mount part number 61771-66TB Gas Tank Name Plate to Harley-Davidson Fat-Bob® style gas tanks. It may be necessary to slightly bend tank trim and mounting bracket to contour of tank surface. |
61742-93T | This bracket kit is designed to mount part number 61775-59T Gas Tank Name Plate to Harley-Davidson Fat-Bob® style gas tanks. It may be necessary to slightly bend tank trim and mounting bracket to contour of tank surface. |
61780-91T | This bracket kit is designed to mount part number 61773-57T or 61773-58T Gas Tank Medallions to various flat surfaces. |
61781-91T | This bracket kit is designed to mount part number 61773-57T or 61773-58T Gas Tank Medallions on curved surfaces, such as Fat Bob® style gas tanks. |
61782-91T | This bracket kit is designed to mount part number 61777-63T Gas Tank Medallions to Harley-Davidson Fat-Bob® style gas tanks. It may be necessary to slightly bend tank trim and mounting bracket to contour of tank surface. |
61783-92T | This bracket kit is designed to mount part number 61769-47T Gas Tank Medallions to Harley-Davidson Fat-Bob® style gas tanks. |
61784-92T | This bracket kit is designed to mount part number 61774-51T Gas Tank Name Plate to Harley-Davidson Fat-Bob® style gas tanks. It may be necessary to slightly bend tank trim and mounting bracket to contour of tank surface. |
61785-92T | This bracket kit is designed to mount part number 61769-40T Gas Tank Name Plate to Harley-Davidson Fat-Bob® style gas tanks. It may be necessary to slightly bend tank trim and mounting bracket to contour of tank surface. |
61840-94T | This bracket kit is designed to mount part number 61814-55T or 61841-94T Gas Tank Name Plate to Harley-Davidson Fat-Bob® style gas tanks. |
INSTALLATION
- Throughly clean tank of all dirt, grease, wax, etc., in the area medallions are to be mounted.
- Attach medallions to mounting brackets using screws provided.
- Fit medallion and bracket on intended spot, paying close attention to contour of the spot for curved surface application.
- Remove adhesive backing from mounting bracket and press firmly to intended area within outline from above.
- Remove medallion and again press firmly on mounting bracket to assure full adhesive to the surface.
- Reinstall medallions. Use caution when tightening screws to avoid cracking the medallions.