CIRCULATOR SEAT PAD
J049222009-03-31
GENERAL
Kit Number
51074-10, 51078-10, 51076-10
Models
For model fitment information, see the P&A Retail Catalog or the Parts and Accessories section of www.harley-davidson.com (English only).
Kit Contents
This kit contains one seat or pillion pad.
There are no Service Parts available with this kit.
INSTALLATION
- See Figure 1. Install the seat pad (1) by placing the retaining strap (2) over the nose of the seat. Work the strap over fuel tank mounting hardware as necessary, until the strap holds the seat pad in place.
- See Figure 2. If installing a pillion pad, connect the pillion pad (2) to the seat pad (1) using the hook-and-loop straps (3) attached to each pad.
CARE AND MAINTENANCE
- When necessary, wash the seat pad by hand.
- If the seat pad becomes wet, due to inclement weather or washing, allow it to air dry.
| 1 | Seat pad |
| 2 | Retaining strap |
Figure 1. Seat Pad Retaining Strap Location
| 1 | Seat pad |
| 2 | Pillion pad |
| 3 | Hook and loop straps |
Figure 2. Seat and Pillion Pad