1. | Remove the two hinge bolts and locknuts attaching the existing footboard to the mounting brackets, and remove the footboard. Save the hardware for installation. | |
2. | Clean and inspect the footboard brackets, and replace if worn, rusted or damaged. | |
3. | See Figure 1. Set the correct footboard in place over the mounting brackets. Align the holes and install the pivot screws and nuts removed in Step 1. Nuts should be on the inboard side. | |
4. | Tighten. Torque: 9–12 N·m (60–80 in-lbs) | |
5. | Check that the footboard pivots freely on the hinge bolts. | |
6. | Repeat for the opposite side. |
Item | Description (Quantity) | Part Number |
---|---|---|
1 | Footboard assembly, right | 50500271 |
Footboard assembly, left (not shown) | 50500272 | |
2 | Rubber insert, right | 50500257 |
Rubber insert, left (not shown) | 50500258 | |
3 | Footboard trim, right | Not Sold Separately |
Footboard trim, left (not shown) | Not Sold Separately | |
4 | Footboard pan, right | Not Sold Separately |
Footboard pan, left (not shown) | Not Sold Separately | |
5 | Screw, #10-24 x 5/16 in (8) | Not Sold Separately |