RIDER BACKREST ORGANIZER KIT
J061082014-08-15
GENERAL
Kit Number
93300098
Models
For model fitment information, see the P&A Retail Catalog or the Parts and Accessories section of www.harley-davidson.com (English only).
WARNINGRider and passenger safety depend upon the correct installation of this kit. If the procedure is not within your capabilities or you do not have the correct tools, have a Harley-Davidson dealer perform the installation. Improper installation of this kit could result in death or serious injury. (00308b)
NOTE
Some local governments prohibit or restrict the use of headset (helmet-mounted) speakers and headphones. Check with local authorities and obey all applicable laws and regulations.
INSTALLATION
- See Figure 1. Loosen the cord locks (3) and slide near the ends of the lacing cord (2).
- Loosen the lacing cord on the rider backrest organizer (1).
- Slide the rider backrest organizer over and onto the backrest. The backrest foam can be compressed to ease installation.
- Once the rider backrest organizer is in position, tighten the lacing cord.
- Slide the cord locks up to the rider backrest organizer.
- Slide the lacing cord down the backrest bracket mounting hole.
NOTE
Rider backrest organizer weight limit is 2 lb (0.9 kg).
Contents must fit into pouches with zippers completely closed.
SERVICE PARTS
Figure 1. Service Parts: Rider Backrest Organizer Kit
Table 1. Service Parts
Item | Description (Quantity) | Part Number |
|---|---|---|
1 | Rider backrest organizer | Not sold separately |
2 | Lacing cord (2) | Not sold separately |
3 | Cord lock (2) | Not sold separately |
Items mentioned in text, but not included in kit. | ||
A | Zipper tab (2) | |
B | Media pouch | |