1. | Remove the hardware fastening the stock footpeg to the motorcycle footpeg support. Save the hardware for installation of new footpegs. | |
2. | Remove the existing footpegs and spring washers. Note the orientation of, and save, the spring washers for installation. |
WARNING Footrests must fold up and toward rear of motorcycle if struck. Failure to set footrests to fold up and back could result in death or serious injury. (00366a) | ||
1. | NOTE See Figure 1. When installing the footpeg on the motorcycle footpeg support, make sure the spring washer (1) is positioned inside of the footpeg support with the square edge toward the inside of the support. a. Place a spring, along with the mount end of the footpeg, inside the slots of the footpeg supports. b. Secure footpegs with hardware removed earlier. |
1 | Spring washer |
2 | Straight edge |
3 | Footpeg mount support |
Item | Description (Quantity) | Part Number |
---|---|---|
1 | Footpeg, passenger, left, black | 50501720 |
Footpeg, passenger, left, graphite | 50501719 | |
2 | Footpeg, passenger, right, black | 50501718 |
Footpeg, passenger, right, graphite | 50501717 |