PASSENGER FOOTBOARD KIT
941001892021-08-02
GENERAL INFORMATION
Table 1. General Information
Kits | Suggested Tools | Skill Level(1) |
|---|---|---|
50501950, 50501951, 50501952 | Safety Glasses, Torque Wrench |  |
(1) Tightening to torque value or other moderate tools and techniques required
KIT CONTENTS
Figure 1. Kit Contents: Passenger Footboard Kit
Table 2. Kit Contents: Passenger Footboard Kit
 | Verify that all contents are present in the kit before installing or removing items from vehicle. | ||||
|---|---|---|---|---|---|
Item | Qty | Description | Part No. | Notes | |
 | 1 | 1 | Footboard, passenger, left, chrome | 50501953 | |
| 1 | Footboard, passenger, left, black | 50501955 | ||
| 1 | Footboard, passenger, left, black edge cut | 50501957 | ||
| 2 | 1 | Footboard, passenger, right, chrome | 50501954 | |
| 1 | Footboard, passenger, right, black | 50501956 | ||
| 1 | Footboard, passenger, right, black edge cut | 50501958 | ||
| 3 | 4 | Mounting pin | 10500172 | |
GENERAL
Models
For model fitment information, see the Parts and Accessories (P&A) Retail Catalog or the Parts and Accessories section of www.harley-davidson.com.
Verify that the most current version of the instruction sheet is used. It is available at: h-d.com/isheets
Contact Harley-Davidson Customer Support Center at 1-800-258-2464 (U.S. only) or 1-414-343-4056.
Installation Requirements
WARNINGRider and passenger safety depend upon the correct installation of this kit. Use the appropriate service manual procedures. If the procedure is not within your capabilities or you do not have the correct tools, have a Harley-Davidson dealer perform the installation. Improper installation of this kit could result in death or serious injury. (00333b)
NOTE
This instruction sheet references service manual information. A service manual for the year and model motorcycle is required for this installation and is available from:
- A Harley-Davidson dealer.
- H-D Service Information Portal, a subscription-based access available for most 2001 and newer models. For more information see Frequently ask questions about subscriptions.
REMOVE
| 1. | Remove passenger footboards. See service manual. | |
| 2. | Retain ball and spring for later use. |
INSTALL
| 1. | Install footboard supports unless currently installed. NOTE Footboards are side-specific. Install with wider portion forward on vehicle. | |
| 2. | Figure 1 Place previously removed spring into retaining hole (1) in footboard support (2). | |
| 3. | Place previously removed ball on top of spring. | |
| 4. | Position footrest (3) onto footboard support bracket (2), while being careful not to unseat ball. | |
| 5. | Press down on footrest (3) so holes align. | |
| 6. | Insert footboard mounting pins (4) through footrest and two mounting lugs on footboard support. | |
| 7. | Check that ball is seated in detent at underside of footrest. | |
| 8. | Tighten mounting pins. Torque: 16.3–20 N·m (12–15 ft-lbs) | |
| 9. | Repeat previous step on opposite side. |
| 1 | Retaining hole |
| 2 | Footboard support bracket |
| 3 | Footrest |
| 4 | Mounting pin (4) |
Figure 2. Footboard Support and Footrest