Kits | Suggested Tools | Skill Level(1) |
---|---|---|
43000314, 43000315, 43000316, 43000317, 43000318 | Safety glasses, Flathead screwdriver, Isopropyl alcohol |
Item | Qty | Description | Part No. | Notes | |
---|---|---|---|---|---|
1 | 1 | Axle cover, large insert (right side) | Not sold separately | ||
2 | 1 | Axle cover, small insert (left side) | Not sold separately | ||
3 | 1 | O-ring, (right side), not shown | 11900206 | ALL kits | |
1 | O-ring, (left side), not shown | 11900207 | ALL kits |
1. | Place edge of screwdriver into notch located at bottom of axle cover. | |
2. | Gently pry outward to remove. |
1. | Clean axle openings with 50/50 isopropyl alcohol and water mixture. | |||||||||
2. | See Figure 1. Install right axle cover (1). a. See Figure 2. Align flats of spring clip (2) with axle's internal hex flats (3). b. Push axle cover into axle until O-ring (4) makes contact. c. Rotate axle cover logo as needed (if applicable). d. Press firmly on axle cover until fully installed. |
Figure 2. Align Flats | ||||||||
3. | Figure 1 Install left axle cover (2). a. Push axle cover into axle until O-ring makes contact. b. Rotate axle cover logo as needed (if applicable). c. Press firmly on axle cover until fully installed. |