FLH INNER FAIRING KIT

941005712024-01-23

GENERAL INFORMATION

Table 1. General Information

Kits	Suggested Tools	Skill Level⁽¹⁾
57001988	Safety Glasses

(1) Only simple tools and techniques required

KIT CONTENTS

Figure 1. Kit Contents: Inner fairing

Table 2. Kit Contents: Inner Fairing Kit

Verify that all contents are present in the kit before installing or removing items from vehicle.
Item	Qty	Description	Part No.	Notes
1		Inner fairing	57002000
2	1	Fairing clip	57000779
3	1	Mirror plug, left	57300414
4	1	Mirror plug, right	57300412
5	1	Media compartment door	76001162
6	1	Dash panel	57001689

GENERAL

Models

For model fitment information, see the Parts and Accessories (P&A) Retail Catalog or the Parts and Accessories section of www.harley-davidson.com.

Verify that the most current version of the instruction sheet is used. It is available at: h-d.com/isheets

Contact Harley-Davidson Customer Support Center at 1-800-258-2464 (U.S. only) or 1-414-343-4056.

Installation Requirements

WARNING

Rider and passenger safety depend upon the correct installation of this kit. Use the appropriate service manual procedures. If the procedure is not within your capabilities or you do not have the correct tools, have a Harley-Davidson dealer perform the installation. Improper installation of this kit could result in death or serious injury. (00333b)

NOTE

This instruction sheet references service manual information. A service manual for the year and model motorcycle is required for this installation and is available from:

A Harley-Davidson dealer.
H-D Service Information Portal, a subscription-based access available for most 2001 and newer models. For more information see Frequently ask questions about subscriptions.

REMOVE

1.	Remove the inner fairing. See service manual. NOTE Label mirror location prior to removal to ease installation. FLHX/S models:Figure 2 The letters "L" or "R" are stamped on the backing plate and inner fairing to identify mirror location. Figure 2. Mirror location mark
2.	Transfer all components from the original inner fairing. See service manual.

INSTALL

1.	Figure 1 Install media compartment door (5). See service manual.
2.	Figure 1 Install the inner fairing (1), outer fairing and windshield. See service manual.
3.	Figure 1 Install the dash panel (6). See service manual.
4.	Adjust the mirrors for proper field of vision and compliance with local regulations.