0/0
INSTRUMENT GAUGE BEZEL COVER KIT
J017962010-04-16
GENERAL
Kit Numbers
74541-00, 74548-10
Models
Fits 11.7 cm (4⅝ in) diameter gauges. For model fitment information, see the P&A retail catalog or the Parts and Accessories section of www.harley-davidson.com (English only).
Kit Contents
Table 1. Kit Contents
Quantity
Description
1
Bezel cover, for 11.7 cm (4⅝ in) diameter gauge
1
Adhesive tape, double-sided
INSTALLATION
  1. Clean the instrument bezel and bezel cover with a mixture of 50-70% isopropyl alcohol and 30-50% distilled water. Allow to dry thoroughly.
  2. See Figure 1. Cut the tape (1) into five equal pieces.
  3. Remove the paper liner from one side of the tape, and apply the tape to the front face of the gauge, pressing firmly into place. Space all five pieces equally as shown.
  4. Remove the outer liner from the tape.
  5. Place the bezel over the gauge, and press firmly into place.
1Tape (cut into 5 pieces)
2Instrument bezel
3Instrument bezel cover
4Apply tape to this surface
Figure 1. Chrome Instrument Bezel Installation