0/0
Clear/Smoked Bullet Style or VRSC Turn Signal Lens Kits
J024112013-11-01
GENERAL
Kit Numbers
69303-02, 69304-02, 69309-02, 693015-02
Models
For model fitment information, see the P&A retail catalog or the Parts and Accessories section of www.harley-davidson.com (English only).
NOTE
A Service Manual for your motorcycle is available from your Harley-Davidson Dealer.
Kit Contents
See Figure 2 and Table 1.
INSTALLATION
1. See Figure 1. Locate the removal notch on the turn signal lens and carefully pry from housing. Discard lens. Repeat for remaining lenses.
2. Remove bulbs from turn signal assemblies.
3. Obtain new amber bulbs from kit. Install the bulbs marked 1157A (Dual Filament) to the front turn signal assemblies. Install the bulbs marked 1156 (Single Filament) to the rear turn signal assemblies.
NOTE
See Figure 1. VRSC (V-Rod) Models have unique rear turn signal lenses. The rear lens is identified with a dimple mark in the center of lens. The front has no dimple.
1"Bullet" style housing
2Notch
3VRSC rear housing
4Dimple
5Notch
6VRSC rear lens shown
7Turn signal lens (all except VRSC rear shown)
8Bulb
Figure 1. "Bullet" and VRSC Turn Signal Lenses
4. Obtain new lens from kit and install by snapping into place. Check turn signals for proper operation.
Figure 2. Service Parts
Table 1. Service Parts
Item
Description (Quantity)
Part Number
Kit Number 69303-02
1
Clear lens, bullet, front and rear (4)
69324-02
Kit Number 69304-02
2
Smoked lens, bullet, front and rear (4)
69325-02
3
Bulb, amber (front) double filament
69331-02
4
Bulb, amber (rear) single filament
69330-02
Kit Number 69309-02
1
Clear lens, VRSC, front (2)
69324-02
5
Clear lens, VRSC, rear (2)
69322-02
Kit Number 69315-02
2
Smoked lens, VRSC, front (2)
69325-02
6
Smoked lens, VRSC, rear (2)
69323-02
3
Bulb, amber (front) double filament
69331-02
4
Bulb, amber (rear) single filament
69330-02