TRIKE TRUNK DOOR RETRACTABLE TETHER
J055762012-03-16
GENERAL
Kit Number
53000237
Models
For model fitment information, See the P&A Retail Catalog or the Parts and Accessories section of www.harley-davidson.com (English only).
Kit Contents
There are no Service Parts available with this kit.
INSTALLATION
| 1. | See Figure 1. Remove the existing tether. Install a new tether wheel with the tether bracket facing outward and install the screw from the inside as shown in Figure 1. | |||||||
| 2. | See Figure 2. Pull down the tether and fasten it to the clevis on the trunk lid. | |||||||
| 3. | Install the Bar & Shield logo to the retractable tether as shown in Figure 1. | |||||||
| 4. | Repeat steps for the opposite side. | 
Figure 1. Retractable Tether and Bar & Shield Logo 
Figure 2. Tether fastener |