WARNING To prevent accidental vehicle start-up, which could cause death or serious injury, remove main fuse before proceeding. (00251b) | ||
1. | Remove main fuse. See the service manual. NOTE
| |
2. | Loosen or remove components necessary to access cam cover. | |
3. | Drain oil. | |
4. | See Figure 1. Remove cam cover (1). | |
5. | Clean gasket surface. | |
6. | Replace gasket. | |
7. | Install cam cover. Tighten screws in sequence shown in service manual. Torque: 10.2–13.6 N·m (100–120 in-lbs) | |
8. | Tighten or install components that were loosened or removed. | |
9. | Fill with appropriate oil. See the service manual. | |
10. | Install main fuse. See the service manual. |
Item | Description (Quantity) | Part Number |
---|---|---|
1 | Cam cover (1) | Not Sold Separately |
2 | Medallion (1) | 14100874 |
Service Parts Required Sold Separately | ||
A | Gasket (1) | 25700370 |