FXDRS RIDER SEAT KITS
J067112019-01-15
GENERAL
Kit Number
52000390, 52000398, 52000399
Models
For model fitment information, see the P&A Retail Catalog or the Parts and Accessories section of www.harley-davidson.com (English only).
INSTALLATION
WARNINGRider and passenger safety depend upon the correct installation of this kit. If the procedure is not within your capabilities or you do not have the correct tools, have a Harley-Davidson dealer perform the installation. Improper installation of this kit could result in death or serious injury. (00308b)
NOTE
When a solo seat is installed without a passenger seat, the passenger foot pegs or foot boards and the passenger grab strap must be removed.
| 1. | Remove cowl cover and seat. See Owner's Manual. | |
| 2. | Retain Original Equipment (OE) hardware screws for installation of new seat. | |
| 3. | Install new seat, inserting the tongue at front of seat into the channel into frame. See Owner's Manual. | |
| 4. | Install screws (1). Tighten. Torque: 10–12 N·m (7–9 ft-lbs) | |
| 5. | After installing seat, pull up on the seat to verify that it is secure. See Owner's Manual. |
SERVICE PARTS
Figure 1. Service Parts: FXDRS Rider Seat
Table 1. Service Parts: FXDRS Rider Seat Kits
Item | Description (Quantity) | Part Number |
|---|---|---|
1 | Screw (2) | 3909 |
2 | Solo seat | Not Sold Separately |