0/0
Dipstick Assembly with Analog Oil Temperature Readout
J032302013-11-01
GENERAL
Kit Number
63023-05
Models
For model fitment information, see the P&A retail catalog or the Parts and Accessories section of www.harley-davidson.com (English only).
INSTALLATION
  1. See the Owner's Manual. Remove the original equipment dipstick assembly (oil filler cap).
  2. Insert the new dipstick assembly into the tank. Press down on filler cap while turning clockwise one-quarter turn. When filler cap stops turning it is fully seated.
REMOVAL
This cap is not a pop-up type. To remove, merely pull up on the filler cap while turning counterclockwise one-quarter turn.
Figure 1. Dipstick Assembly with Analog Oil Temperature Readout