SCREAMIN' EAGLE TWIN CAM TAPPET ROLLER KIT
J054822013-04-15
GENERAL
Kit Number
18572-13
Models
For model fitment information, see the P&A Retail Catalog or the Parts and Accessories section of www.harley-davidson.com (English only).
WARNINGRider and passenger safety depend upon the correct installation of this kit. Use the appropriate service manual procedures. If the procedure is not within your capabilities or you do not have the correct tools, have a Harley-Davidson dealer perform the installation. Improper installation of this kit could result in death or serious injury. (00333b)
NOTE
This instruction sheet references service manual information. A service manual for your model motorcycle is required for this installation and is available from a Harley-Davidson dealer.
Kit Contents
Table 1. Service Parts Table
Item | Description (Quantity) | Part Number |
|---|---|---|
1 | Tappet, roller (4) | Not Sold |
INSTALLATION
WARNINGTo prevent accidental vehicle start-up, which could cause death or serious injury, disconnect negative (-) battery cable before proceeding. (00048a)
- Refer to the appropriate service manual section to remove the existing tappets.
- Install the new tappets, seals and gaskets using the appropriate service manual procedures.