0/0
BURST COLLECTION REAR SPEAKER TRIM KIT
J059322015-03-23
GENERAL
Kit Number
76000522, 76000621
Models
For model fitment information, see the P&A Retail Catalog or the Parts and Accessories section of www.harley-davidson.com (English only).
Kit Contents
See Figure 1 and Table 1.
INSTALLATION
1. Remove a Burst speaker trim from the kit.
2. Remove the four original screws from the left speaker grill. Discard the screws.
3. Position the speaker trim over the original speaker trim. Index the trim to orient the medallion as desired.
4. Secure the trim with four screws from the kit. Tighten the screws to 0.8–1 N·m (7–9 in-lbs).
5. Repeat steps for the right side.
SERVICE PARTS
Figure 1. Service Parts: Burst Collection Rear Speaker Trim Kit
Table 1. Service Parts
Item
Description (Quantity)
Part Number
1
Medallion, 1.6 in. Burst Collection
14100424
2
Screw, 6-32 x 1.5 in. (4)
10200328
3
Rear Speaker Burst Collection Trim
Not Sold Separately