INNER FAIRING KIT

J059782016-03-03

GENERAL

Kit Number

57000482, 57000536

Models

For model fitment information, see the P&A Retail Catalog or the Parts and Accessories section of www.harley-davidson.com (English only).

Service Manual Required

WARNING

Rider and passenger safety depend upon the correct installation of this kit. Use the appropriate service manual procedures. If the procedure is not within your capabilities or you do not have the correct tools, have a Harley-Davidson dealer perform the installation. Improper installation of this kit could result in death or serious injury. (00333b)

NOTE

This instruction sheet references service manual information. A service manual for your model motorcycle is required for this installation. One is available from a Harley-Davidson dealer.

Kit Contents

See Figure 1 and Table 1.

INSTALLATION

Remove the windshield and air duct. See the service manual.
Remove the inner fairing. See the service manual.
Remove the right and left side instrument cluster housings and instrument cluster cover. See the service manual.
Transfer all components from the original inner fairing. See the service manual.
See Figure 1. Install new media storage doors (2 and 3) and bumpers (4) on media compartment door. See the service manual.
Transfer switch modules to the new dash panel (5). See the service manual.
Install the new instrument cluster housings (6 and 7). See the service manual.
Install the new inner fairing (1), outer fairing, air duct and windshield. See the service manual.
Adjust the mirrors for proper field of vision and compliance with local regulations.

SERVICE PARTS

Figure 1. Service Parts: Inner Fairing Kit

Table 1. Service Parts Table

Item	Description (Quantity)	Part Number
1	Inner fairing	Not sold separately
2	Media storage door, RH	76000465xxx
3	Media storage door, LH	76000466xxx
4	Media door bumper (4)	58888-98A
5	Dash Panel, instrument cluster	70900411xxx
6	Housing, RH instrument cluster	70900412xxx
7	Housing, LH instrument cluster	70900413xxx