CHIN SPOLIER KIT
941002592022-02-22
GENERAL INFORMATION
Table 1. General Information
Kits
Suggested Tools
Skill Level(1)
57200347
Safety Glasses, Torque Wrench
1 Dark wrench
(1) Only simple tools and techniques required
KIT CONTENTS
Figure 1. Kit Contents: Chin Spoiler Kit
Table 2. Kit Contents: Chin Spoiler Kit
Verify that all contents are present in the kit before installing or removing items from vehicle.
Item
Qty
Description
Part No.
Notes
1
1
Right chin spoiler
Not sold separately
2
1
Left chin spoiler
Not sold separately
GENERAL
Models
For model fitment information, see the Parts and Accessories (P&A) Retail Catalog or the Parts and Accessories section of www.harley-davidson.com.
Verify that the most current version of the instruction sheet is used. It is available at: h-d.com/isheets
Contact Harley-Davidson Customer Support Center at 1-800-258-2464 (U.S. only) or 1-414-343-4056.
Installation Requirements
WARNING
Rider and passenger safety depend upon the correct installation of this kit. Use the appropriate service manual procedures. If the procedure is not within your capabilities or you do not have the correct tools, have a Harley-Davidson dealer perform the installation. Improper installation of this kit could result in death or serious injury. (00333b)
NOTE
This instruction sheet references service manual information. A service manual for the year and model motorcycle is required for this installation and is available from:
REMOVE
1. Remove right and left side OE chin spoiler. See service manual.
a. Save OE screws for later use.
INSTALL
1. Figure 2 Install right chin guard (1).
a. Figure 3 Make sure mounting tabs are attached to center chin guard properly.
2. Figure 2 Install OE screws (2). Tighten.
Torque: 7–9 N·m (62–80 in-lbs)
1Chin guard
2Screw (2)
Figure 2. Chin Guard Installed
1Mounting tab
Figure 3. Mounting Tabs