0/0
Turn Signal Trim Rings
J007372007-08-17
GENERAL
Kit Number
69740-01 and 69749-05
Models
For model fitment information, please see the P&A Retail Catalog or the Parts and Accessories section of www.harley-davidson.com (English only).
Kit Contents
See Figure 1 and Table 1.
INSTALLATION
  1. Remove turn signal lens
  2. Place O-ring (4) in groove between lens and turn signal housing.
  3. Reinstall signal lens.
  4. Install the trim ring (3) onto the turn signal. Notches on turn signal lens must be aligned with notches on trim ring.
  5. Secure trim ring with the provided screw (1) and nut (2). Tighten securely.
  6. Repeat Steps 1-5 for the other turn signal.
SERVICE PARTS
See Figure 1 and Table 1.
Figure 1. Service Parts: Turn Signal Trim Rings
Table 1. Service Parts: Turn Signal Trim Rings
Item
Description (Quantity)
Part Number
1
Screw
3824
2
Nut
8006
3
Trim Ring
Not Sold Separately
4
O-ring
11371
Items mentioned in text but not included in kit:
A
Original lens and screw
B
Turn signal housing