0/0
Softail Swingarm Frame Insert Kit
J033822007-05-11
GENERAL
Kit Number
47441-04, 47442-04, 48211-08, 48212-08
Models
For model fitment information, please see the P&A Retail Catalog or the Parts and Accessories section of www.harley-davidson.com (English only).
NOTE
A Service Manual for the year and model motorcycle is available from a Harley-Davidson dealer.
Kit Contents
See Figure 1.
INSTALLATION
  1. To ensure surface cleanliness, clean the indented insert areas of the frame with a mixture of 50 to 70% isopropyl alcohol and 30 to 50% distilled water. Allow to dry thoroughly.
    2. NOTE
    The frame inserts are location specific.
  2. Peel the liner from the adhesive backing of one of the frame inserts.
  3. Position the insert over the correct indented area on the frame without touching the adhesive to the frame surface. Center the insert over the indentation.
  4. Press the insert squarely and firmly into the frame indentation, and hold pressure for about 60 seconds. After releasing pressure, avoid direct contact with the panel for 20 minutes.
  5. Repeat for the remaining frame inserts.
1Upper right
2Lower right
3Upper left
4Lower left
Figure 1. Softail Swingarm Frame Inserts
SERVICE PARTS
NOTE
There are no Service Parts in this kit.