CHROME FRONT FENDER HARDWARE KIT
J035572006-09-22
GENERAL
Kit Number
94415-05
Models
For model fitment information, please see the P&A Retail Catalog or the Parts and Accessories section of www.harley-davidson.com (English only).
Does not fit models with Billet Fork Slider Kit or Inverted Fork Kit.
Additional Parts Required
Loctite® 243 (Blue) Threadlocker and Sealant (H-D Part Number 99642-97) is required for the proper installation of this kit.
Kit Contents
Table 1. Kit Contents
Description (Quantity)
Part Number
Screw, socket head (chrome) (4)
94337-91TS
INSTALLATION
NOTE
Remove and replace one screw before removing the next.
1. FL models: Remove one front fender attaching screw and hex flanged locknut. Discard only the screw. FX models: Remove one front fender attaching screw, acorn nut and two flat washers. Discard only the screw.
2. Apply a drop of Loctite® 243 (blue) to the threads of a new chrome screw from the kit. Install the screw with the saved hardware from Step 1. Tighten to 20.3–28.5 N·m (15–21 ft-lbs).
3. Repeat for the remaining three screws.
1Screw (4)
2Saved hardware
3FX models
4FL models
Figure 1. Front Fender Mounting Hardware