Description (Quantity) | Part Number |
---|---|
Chrome Inner Primary Housing | Not Sold Separately |
Sealing fastener (5) | 786A |
1. | See the Drive section of the appropriate Service Manual, and remove the stock inner primary housing. Clean the internal threads in the crankcase and transmission case where the sealing fasteners were removed using a wire brush. Install the chrome inner primary housing as indicated below. Replace the five stock sealing fasteners with the five bolts included in this kit. Put a light coat of primary oil under the sealing fasteners and then tighten to 31–34 N·m (23–25 ft-lbs). |