DYNA REAR AXLE COVER KIT
J038532005-06-27
GENERAL
Kit Number
44346-06
Models
This kit fits 2006 Dyna models. This kit does not fit on motorcycles equipped with saddlebags.
INSTALLATION
| 1. | Place axle covers in position over ends of swingarm with the deeper cover on the left side (covering the axle nut). | |
| 2. | Fasten the clamping bars (3) to the backs of the covers using hex-head screws (5) and Belleville washers (4), securing the covers to the swingarm. Tighten the hex-head screws to 2.4–3 N·m (21–27 in-lbs). Do not overtighten |
SERVICE PARTS
Figure 1. Service Parts: Dyna Swingarm Axle Cover
Table 1. Service Parts Table
Item | Description (Quantity) | Part Number | Item | Description (Quantity) | Part Number | |
|---|---|---|---|---|---|---|
1 | Axle cover, left side | Not Sold Separately | 4 | Washer, Bellville (4) | 45159-97 | |
2 | Axle cover, right side | Not Sold Separately | 5 | Screw, #10-24 x 1/2 inch (4) | 3644 | |
3 | Clamping bar (2) | Not Sold Separately | ||||