0/0
CHROME LOWER BELT GUARD COVER KIT
J039042009-05-15
GENERAL
Kit Numbers
60489-06A, 60514-07A
Models
For model fitment information, see the P&A Retail Catalog or the Parts and Accessories section of www.harley-davidson.com (English only).
Kit Contents
See Figure 1 and Table 1.
INSTALLATION
NOTE
The chrome debris deflector cover mounts over the existing deflector.
  1. See Figure 1. Remove and discard rear two screws attaching debris deflector (B) on rear rear fork (A). The front screw (C) does not need to be removed.
  2. Slide the chrome cover (1) over the debris deflector, making sure the lower and front edge of the deflector is inserted into the edge clips of the cover.
  3. Install chrome cover on debris deflector and rear fork using two washers (3) and screws (2) from kit. Tighten to 40-60 in-lbs (4.5-6.8 Nm).
  4. Make sure chrome lower belt guard cover does not contact drive belt, tire, or wheel. If necessary, loosen mounting screws and reposition for clearance.
SERVICE PARTS
Figure 1. Service Parts: Chrome Debris Deflector Cover
Table 1. Service Parts
Kit
Item
Description (Quantity)
Part Number
60489-06A
1
Lower belt guard cover (chrome)
Not Sold
Separately
2
Screw (2)
3765
3
Washer (2)
6228W
60514-07A
1
Lower belt guard cover (chrome)
Not Sold
Separately
2
Screw (2)
3765
3
Washer (2)
6228W
Items mentioned in text, but not included in kit.
A
Rear fork
B
Debris deflector
C
Screw