0/0
PUSHBUTTON FUEL CONSOLE DOOR RELEASE
J047122019-07-19
GENERAL
Kit Number
53919-04B
Models
For model fitment information, see the P&A Retail Catalog or the Parts and Accessories section of www.harley-davidson.com (English only).
Kit Contents
See Figure 1 and Table 1.
INSTALLATION
  1. Open the fuel door. Remove and discard stock lock and nut.
  2. See Figure 1. Install pushbutton lock (2) and nut (1) on fuel door.
  3. Remove screws (A) and replace the stock hinge mounting clip with the hinge mounting clip (3) from the kit. Install stock screws. Do not over-tighten.
  4. Close the fuel door. A small amount pressure will be needed to close the fuel door because it is now spring-loaded.
NOTE
To keep the pushbutton lock assembly operating smoothly, lightly spray lubricant on the mechanism as needed.
SERVICE PARTS
Figure 1. Service Parts: Console Pushbutton Fuel Door Release
Table 1. Service Parts
Item
Description (Quantity)
Part Number
1
Nut, hex
84850-92
2
Fuel release, pushbutton
Not Sold Separately
3
Clip, hinge mounting
10334
Items mentioned in text, but not included in kit.
A
Screw (2)
B
Hinge pin
C
Fuel door