1. | See Figure 1 and Table 1. Install V-logo (4) to trim rail (1) with hex washer screws (3) and lock washers (2). | |
2. | Reach under rear edge of fender and remove locknut (A) and washer (B). Retain locknut and washer and use to mount new trim rail. | |
3. | Loosen and remove the two screws (C) and locknuts (D) which attach fender rail to saddlebag support bracket. Retain screws (C) and locknuts (D) and use to mount new trim rail. | |
4. | Place new trim rail in position and install washer (B), locknut (A), screws (C) and locknuts (D). | |
5. | Tighten locknut (A) to 5–9.6 N·m (45–85 in-lbs) and locknuts (D) to 20.3–27.1 N·m (15–20 ft-lbs). |
Item | Description (Quantity) | Part Number |
---|---|---|
1 | Trim rail, rear fender | Not Sold Separately |
2 | Lock washer (2) | 7115 |
3 | Hex washer screw (2) | 7611 |
4 | V-logo | 91112-94 |
Items mentioned in text, but not included in kit. | ||
A | Locknut (2) | |
B | Washer (2) | |
C | Screw (2) | |
D | Locknut (2) |