0/0
XL BLACK HEADER PIPES
J056762012-10-03
GENERAL
Kit Number
65600155
Models
For model fitment information, see the P&A Retail Catalog or the Parts and Accessories section of www.harley-davidson.com (English only).
Additional Parts Required
Two Torca muffler clamps (65296-95A)
Two exhaust port gaskets (65324-83B)
Refer to the P&A or Screamin' Eagle catalogs for matching muffler sets.
WARNING
Rider and passenger safety depend upon the correct installation of this kit. Use the appropriate service manual procedures. If the procedure is not within your capabilities or you do not have the correct tools, have a Harley-Davidson dealer perform the installation. Improper installation of this kit could result in death or serious injury. (00333b)
NOTE
This instruction sheet references service manual information. A service manual for your model motorcycle is required for this installation and is available from a Harley-Davidson Dealer.
Kit Contents
See Figure 1 and Table 1.
There are no service parts available with this kit.
INSTALLATION
  1. Refer to the service manual to remove existing mufflers and exhaust pipes.
    2. NOTE
    To be sure of the sealing integrity of muffler clamps and prevent the possibility of leakage, Harley-Davidson recommends that Torca muffler clamp assemblies be discarded and replaced each time they are removed.
  2. Install the new exhaust pipes and mufflers according to the service manual instructions.
SERVICE PARTS
Figure 1. Service Parts: XL Black Header Pipes
Table 1. Service Parts
Description
Part Number
Exhaust pipe, black
Not Sold Separately