0/0
7-Inch Headlamp Trim Ring
J057392014-03-12
GENERAL
Kit Number
67700215, 67700216, 61400292, 61400294
Models
For model fitment information, see the P&A Retail Catalog or the Parts and Accessories section of www.harley-davidson.com (English only).
Kit Contents
See Table 1 and Figure 1.
Table 1. Kit Contents
Item
Description
Part Number
1
Screw
3824
2
Nut
8006
3
Trim ring
Not Sold Separately
INSTALLATION
1. Loosen original equipment trim ring screw.
NOTE
If the original equipment trim ring screw is not loosened, the accessory trim ring will not fit properly.
2. Slip new trim ring over original equipment trim ring. The partial lip on the back of the accessory ring should slip between headlamp housing and original equipment trim ring.
NOTE
See Figure 1. If necessary, remove screw and nut to allow trim ring to slip over original equipment trim ring. Position mounting screw of accessory trim ring at bottom of headlamp.
Figure 1. Headlamp Trim Ring
3. Tighten original equipment ring screw.
4. Tighten accessory trim ring screw.