PASSING LAMP TRIM RINGS
J059272017-08-23
GENERAL
Kit Number
61400255, 61400353, 61400354, 61400355
Models
For model fitment information, see the P&A Retail Catalog or the Parts and Accessories section of www.harley-davidson.com (English only).
WARNINGRider and passenger safety depend upon the correct installation of this kit. If the procedure is not within your capabilities or you do not have the correct tools, have a Harley-Davidson dealer perform the installation. Improper installation of this kit could result in death or serious injury. (00308b)
INSTALLATION
| 1. | Loosen the screw from one original equipment passing lamp trim ring. Remove the ring. | |
| 2. | See Figure 1. Remove the screw (2) from the accessory trim ring (1) and set aside temporarily. | |
| 3. | Insert the passing lamp sealed unit (B) inside the new trim ring. NOTE Rotating the lamp unit may help insertion. | |
| 4. | Position the bottom of the lamp unit to line up with the split in the trim ring. | |
| 5. | 2002 and later models: a. Install the adapter ring (C) onto the passing lamp housing. b. Install the trim ring and lamp assembly onto the adapter ring. c. Align the lug (or lugs) on the back of the glass lamp unit with the notches in the adapter ring. | |
| 6. | 1962 through 2001 models: a. Install the trim ring and lamp assembly onto the passing lamp housing. b. Align the lug (or lugs) on the back of the glass lamp unit with the notches in the passing lamp housing. | |
| 7. | Assemble the screw into the trim ring. Tighten to: Torque: 0.8–1 N·m (7–9 in-lbs) Trim Ring Screw |
SERVICE PARTS
Figure 1. Passing Lamp Trim Rings
Table 1. Service Parts: Passing Lamp Trim Rings
Item | Description (Quantity) | Part Number |
|---|---|---|
1 | Trim Ring | Not Sold Separately |
2 | Screw (6-32 x .625) (Kit 61400255) | 10200394 |
Screw (6-32 x .650) (Kits 61400353, 61400354, 61400355) | 12600072 | |
A | Split in trim ring | Reference only |
B | Passing lamp sealed unit | Reference only |
C | Adapter ring (2002 and later) | Reference only |
D | Alignment notches | Reference only |
E | Passing lamp housing (2002 and later) | Reference only |
F | Alignment notch | Reference only |
G | Passing lamp housing (1962-2001) | Reference only |