1. | Clean lower area of induction module side of backplate. Use a mixture of 50-70% isopropyl alcohol and 30-50% distilled water. Allow to dry completely. Align adhesive backed clip (8) with opening upwards, and affix in six o'clock position. Clamp wire harness previously removed from OE backplate. | |
2. | See Figure 1. Install two O-rings (1) from kit in grooves around breather screw holes on induction module side of backplate assembly (2). | |
3. | Align flat edge of gasket (3) with the molded tab. Install on induction module side of backplate. | |
4. | Insert breather screws (A) through the backplate. | |
5. | Apply Loctite 243 (blue) to breather screw threads and mating tapped holes in cylinder head. | |
6. | Thread screws into cylinder head but do not tighten. | |
7. | Thread air cleaner mounting studs (4) all the way through the backplate (2) and gasket (3) until the screw threads are captured in induction module. Leave fasteners loose. | |
8. | Alternately tighten two breather screws (A) to 13.6–16.3 N·m (120–144 in-lbs). | |
9. | Press breather plugs (5) into breather screw cavities, aligning tubes with recesses in backplate. | |
10. | Tighten three air cleaner studs (4) to 6.2–6.8 N·m (55–60 in-lbs). |
1. | See Figure 1. Secure air filter element (7) to air cleaner mounting studs (4) using screws (6). Tighten screws to 6.2–6.8 N·m (55–60 in-lbs). | |
2. | Apply Loctite 243 (blue) to air cleaner cover screw (C). Secure air cleaner cover (B) to air filter element (7) with screw. | |
3. | Align air cleaner cover horizontally for best appearance. Tighten screw securely. Tighten to 4.1–6.8 N·m (36–60 in-lbs). |
WARNING After installing seat, pull upward on seat to be sure it is locked in position. While riding, a loose seat can shift causing loss of control, which could result in death or serious injury. (00070b) | ||
1. | Refer to the Service Manual. Install main fuse. |
Item | Description (Quantity) | Part Number |
---|---|---|
1 | O-ring (2) | 11292 |
2 | Backplate assembly, black Backplate assembly, chrome | 29586-06 29510-05 |
3 | Gasket, backplate | 29583-01A |
4 | Stud, air cleaner (3) | 29447-99A |
5 | Plug, breather (2) | 29557-05 |
6 | Screw, air cleaner element (3) | 3938 |
7 | Filter element | 29442-99D |
8 | Clip, adhesive | 10102 |
Items mentioned in text, but not included in kit: | ||
A | Breather screw (2) | |
B | Air cleaner cover | |
C | Screw |