SCREAMIN' EAGLE STREET CANNON MUFFLER ENDCAP KITS
J064572017-05-02
GENERAL
Kit Numbers
65100122, 65100123
Models
For model fitment information, see the P&A retail catalog or the Parts and Accessories section of www.harley-davidson.com (English only).
Installation Requirements
WARNINGRider and passenger safety depend upon the correct installation of this kit. If the procedure is not within your capabilities or you do not have the correct tools, have a Harley-Davidson dealer perform the installation. Improper installation of this kit could result in death or serious injury. (00308b)
Installation
| 1. | See Figure 1. Place end cap (1) on muffler and orient script as desired. | |
| 2. | Install the 3 supplied end cap screws. Tighten. Torque: 10.8–13.6 N·m (8–10 ft-lbs) NOTE Failure to tighten screws alternately could cause a gap between endcap and muffler. | |
NOTICE Wipe all fingerprints off of exhaust system components after installation and before starting engine. Oil from hands can leave permanent marks on exhaust system finish. (00346a) | ||
| 3. | Repeat for other muffler. |
SERVICE PARTS
Figure 1. Service Parts
Table 1. Service Parts
Item | Description (Quantity) | Part Number |
|---|---|---|
1 | Button head screw (3) | 10500103 |
2 | Endcap (2) | Not sold separately |