SERVICE PARTS
Figure 1. Service Parts: Brass Rear Axle Cover Kit
Table 1. Service Parts: Brass Rear Axle-Nut Cover Kit
Item | Description (Quantity) | Part Number |
---|
1 | Axle-nut cover, left side | Not Sold Separately |
2 | Set screw, 10-24 x 1/4 inch | 3365 |
3 | Axle cover, right side | Not Sold Separately |
4 | Set screw, 10-24 x 3/8 inch | 3194 |
CARE AND CLEANING GUIDELINES FOR BRASS PARTS
Cleaning Instructions
Verify part is dry and free of dirt or debris.
Place a small amount of Harley-Davidson® Chrome Clean & Shine on a microfiber cloth or detailing swab.
Using light pressure, rub the brass parts with the microfiber cloth. For hard to reach places or grooves, use the detailing swab.
Obtaining a Bright Finish
Brass parts will naturally age and darken with time. If a bright brass finish is preferred, place some Harley-Davidson Bare Metal Polish on a microfiber cloth and lightly rub on the brass parts until they reach the desired brightness.
Slowing the Natural Aging Process
To slow the aging process of the brass parts, place a small amount of Harley-Davidson Glaze Poly Sealant on a microfiber cloth or detailing swab, and lightly rub on the parts until the sealant has soaked in.
Precautions
Use of non-recommended cleaning, polishing and protective products will result in the removal of the aged finish from the brass parts.
Prolonged contact with certain items (hands, gloves, boots, dust, etc.) and exposure to the elements will also alter all surface finishes and is NOT considered a defect.
Avoid cleaning parts with abrasive and aggressive chemicals and abrasive cleaning pads.
Avoid ammoniated products and bleach.
Prolonged exposure to water will alter the brass finish. Wipe down parts after contact with water.
Excess rubbing may lighten the surface appearance of the part.