SHIFTER PEG KIT
J065182018-08-21
GENERAL
Kit Number
Shifter peg: 33600180, 33600214
Trim: 33600215, 33600216, 33600217, 33600218
Models
For model fitment information, see the P&A Retail Catalog or the Parts and Accessories section of www.harley-davidson.com (English only).
WARNINGRider and passenger safety depend upon the correct installation of this kit. If the procedure is not within your capabilities or you do not have the correct tools, have a Harley-Davidson dealer perform the installation. Improper installation of this kit could result in death or serious injury. (00308b)
INSTALLATION
| 1. | Remove previously installed shifter peg from motorcycle. Discard peg and screw.LOCTITE 243 MEDIUM STRENGTH THREADLOCKER AND SEALANT (BLUE) (99642-97) | |
| 2. | See Figure 1. Apply threadlocker to the screw. Install to shift pedal (A) with screw (1). Tighten. Torque: 14.91–20.33 N·m (11–15 ft-lbs) |
Replace Trim
| 1. | Remove screw. | |
| 2. | Replace trim.LOCTITE 243 MEDIUM STRENGTH THREADLOCKER AND SEALANT (BLUE) (99642-97) | |
| 3. | Apply threadlocker and install screw. Tighten. Torque: 14.91–20.33 N·m (11–15 ft-lbs) |
SERVICE PARTS
Figure 1. Service Parts: Shifter Peg Kit
Table 1. Service Parts Table
Item | Description (Quantity) | Part Number |
|---|---|---|
1 | Screw | 10200653 |
2 | Trim | Not Sold Separately |
3 | Body | Not Sold Separately |
Items mentioned in text, but not included in kit: | ||
A | Shift pedal | |