FOOT PEG KIT
J065272024-01-23
GENERAL INFORMATION
Table 1. General Information
Kits | Suggested Tools | Skill Level(1) |
|---|---|---|
50500803, 50500804, 50500805, 50500806, 50500807, 50500808, 50501008, 50501009, 50501010, 50501855, 50501856, 50501857, 50501898, 50501899, 50501900, 50502504, 50502505, 50502576, 50502577 | Safety Glasses, Torque Wrench, Loctite 243 medium (blue), E-clip Tool |  |
(1) Tightening to torque value or other moderate tools and techniques required
KIT CONTENTS
Figure 1. Kit Contents: Foot Peg Kit
Table 2. Kit Contents: Foot Peg Kit
 | Verify that all contents are present in the kit before installing or removing items from vehicle. | ||||
|---|---|---|---|---|---|
Item | Qty | Description | Part No. | Notes | |
 | 1 | 1 | Rubber foot peg | Not sold separately | |
| 2 | 1 | Socket head cap screw | Not sold separately | |
| 3 | 1 | Foot peg base | Not sold separately | |
| 4 | 1 | Foot peg wear peg | 50500901 | |
| 5 | 2 | Chrome medallion grip | 14100879 | |
| 6 | 1 | Foot peg mount | Not sold separately | |
Figure 2. Kit Contents: Foot Peg Kits - Switchback / Empire Collections
Table 3. Kit Contents: Footpeg Kits - Switchback / Empire Collections
| Verify that all contents are present in the kit before installing or removing items from vehicle. | ||||
|---|---|---|---|---|---|
Item | Qty | Description | Part No. | Notes | |
| 1 | 1 | Footpeg, rider, left, chrome | 50501849 | Kits 50501855, 50501856, 50501857 (Empire) |
| 50501837 | Kits 50501898, 50501899, 50501900 (Empire) | |||
| Footpeg, rider, left, black | 50501850 | Kits 50501855, 50501856, 50501857 (Empire) | ||
| 50501838 | Kits 50501898, 50501899, 50501900 (Empire) | |||
| 50502514 | Kit 50502504 (Switchback) | |||
| 50502578 | Kit 50502576 (Switchback) | |||
| Footpeg, rider, left, black edge cut | 50501849 | Kits 50501855, 50501856, 50501857 (Empire) | ||
| 50501849 | Kits 50501898, 50501899, 50501900 (Empire) | |||
| Footpeg, rider, left, silver | 50502515 | Kit 50502505 (Switchback) | ||
| 50502579 | Kit 50502577 (Switchback) | |||
| 2 | 1 | Footpeg, rider, right, chrome | Not sold separately | Kits 50501898, 50501899, 50501900 (Empire) |
| Footpeg, rider, right, black | Not sold separately | Kits 50501855, 50501856, 50501857 (Empire) | ||
| Not sold separately | Kits 50501898, 50501899, 50501900 (Empire) | |||
| 50502514 | Kit 50502504 (Switchback) | |||
| 50502578 | Kit 50502576 (Switchback) | |||
| Footpeg, rider, right, black edge cut | Not sold separately | Kits 50501855, 50501856, 50501857 (Empire) | ||
| Footpeg, rider, right, silver | 50502515 | Kit 50502505 (Switchback) | ||
| 50502579 | Kit 50502577 (Switchback) | |||
| 3 | 1 | Wear peg | 50500628 | Kits 50501855, 50501856, 50501857, 50501898, 50501899, 50501900 (Empire) |
| 2 | Wear peg | 50502528 | Kits 50502504, 50502505 (Switchback) | |
| 4 | 4 | Screw, wear peg | 10201358 | Kits 50502504, 50502505 (Switchback) |
| 5 | 2 | Screw, adjustment, 5/16-18 SHCS, black | 10500109 | |
GENERAL
Models
For model fitment information, see the Parts and Accessories (P&A) Retail Catalog or the Parts and Accessories section of www.harley-davidson.com.
Verify that the most current version of the instruction sheet is used. It is available at: h-d.com/isheets
Contact Harley-Davidson Customer Support Center at 1-800-258-2464 (U.S. only) or 1-414-343-4056.
Installation Requirements
WARNINGRider and passenger safety depend upon the correct installation of this kit. Use the appropriate service manual procedures. If the procedure is not within your capabilities or you do not have the correct tools, have a Harley-Davidson dealer perform the installation. Improper installation of this kit could result in death or serious injury. (00333b)
NOTE
This instruction sheet references service manual information. A service manual for the year and model motorcycle is required for this installation and is available from:
- A Harley-Davidson dealer.
- H-D Service Information Portal, a subscription-based access available for most 2001 and newer models. For more information see Frequently ask questions about subscriptions.
REMOVE
| 1. | Figure 3 Remove pin (4) and retaining clip (2). Retain. | |
| 2. | Save all hardware, including torsion spring (1), for installation of new footpegs (3). |
INSTALL
| 1. | Figure 3 Insert short leg of torsion spring (1) into hole in new footpeg (3). | |
| 2. | Align long leg of torsion spring (1) to hole in foot peg mount and insert. | |
| 3. | Rotate footpeg (3) into position in clevis and insert pin (4) through clevis, footpeg (3) and spring (1). NOTE Figure 3 When performing the next step, verify that the spring is positioned inside of the footpeg. | |
| 4. | Rotate footpeg (3) into position in clevis and insert pin (4) through clevis, footpeg (3) and spring (1). | |
| 5. | Install retaining clip (2). | |
| 6. | Repeat steps 2, 3, 4 and 5 on other side. | |
| 7. | Figure 5 For adjustable footpegs: a. Forward controls, foot surface to be parallel to mounting pin. b. Mid controls, foot surface to be parallel to ground. c. Tighten adjustment screw. Torque: 29 N·m (21 ft-lbs) |
Wear Peg Replacement
| 1. | Figure 1 Remove existing wear peg from foot peg. | |
| 2. | Apply a few drops of threadlocker to threads of new wear peg and install to footpeg.LOCTITE 243 MEDIUM STRENGTH THREADLOCKER AND SEALANT (BLUE) (99642-97) | |
| 3. | Tighten wear peg. Torque: 3.4–4.8 N·m (30–42 in-lbs) |
Wear Peg Replacement - Switchback Pegs
| 1. | Figure 2 When servicing wear peg, remove existing wear peg screws from foot peg. | |
| 2. | Apply a few drops of threadlocker to threads of existing screws.LOCTITE 243 MEDIUM STRENGTH THREADLOCKER AND SEALANT (BLUE) (99642-97) | |
| 3. | Install new wear peg with existing screws. Tighten Torque: 1.7–2.25 N·m (15–20 in-lbs) |
| 1 | Torsion spring |
| 2 | Retaining clip |
| 3 | Footpeg |
| 4 | Pin |
Figure 3. Rider Footpeg Torsion Spring Installation
Figure 4. Torsion Spring
Figure 5. Footpeg Adjusting Screw