0/0
BRAKE PEDAL PAD KIT
J067862020-01-14
GENERAL INFORMATION
Table 1. General Information
Kits
Suggested Tools
Skill Level(1)
Time
50600424, 50600425, 50600386, 50600401
Safety Glasses, Torque Wrench
1 hour
(1) Tightening to torque value or other moderate tools and techniques required
KIT CONTENTS
Figure 1. Kit Contents: Brake Pedal Pad Kit Components
Table 2. Kit Contents: Brake Pedal Pad Kit Components
Item
Qty
Description
Part No.
Notes
1
1
Brake pedal, black
50600400
1
Brake pedal, graphite
50600387
2
1
Brake pedal, black
50600422
1
Brake pedal, raw
50600423
3
1
Lockwasher
7042
4
1
Screw
10201005
Items mentioned in text but not included in kit.
A
1
Brake lever
NOTE
Verify that all contents are present in the kit before installing or removing items from vehicle.
GENERAL
Models
For model fitment information, see the P&A Retail Catalog or the Parts and Accessories section of www.harley-davidson.com (English only)
Verify that the most current version of the instruction sheet is used. It is available at: www.harley-davidson.com/isheets
Contact Harley-Davidson Customer Support Center at 1-800-258-2464 (U.S. only) or 1-414-343-4056.
Installation Requirements
WARNING
Rider and passenger safety depend upon the correct installation of this kit. If the procedure is not within your capabilities or you do not have the correct tools, have a Harley-Davidson dealer perform the installation. Improper installation of this kit could result in death or serious injury. (00308b)
REMOVE
1. Remove previously installed brake pedal from foot brake lever (A).
2. If necessary, replace brake lever per brake lever instructions.
INSTALL
1. Align new brake pedal pad (1, 2) with the end of foot brake lever (A). Make sure to insert tab on brake pedal pad into slot in brake lever.
2. Assemble lockwasher (3) and screw (4).
3. Thread screw (4) into in foot brake lever (A) and into back of brake pedal pad (1, 2). Tighten.
Torque: 26 N·m (19.2 ft-lbs)