0/0
19 INCH LACED FRONT WHEEL KIT
941002022021-03-08
GENERAL
WARNING
Install only wheels and installation kits approved for your model motorcycle. Contact a Harley-Davidson dealer to verify fitment. Mismatching wheels and installation kits or installing wheels not approved for your model can cause loss of control, which could result in death or serious injury. (00610c)
WARNING
Harley-Davidson recommends the use of its specified tires. Harley-Davidson vehicles are not designed for operation with non-specified tires, including snow, moped and other special-use tires. Use of non-specified tires can adversely affect stability, handling or braking and lead to loss of vehicle control, which could result in death or serious injury. (00024d)
Kit Numbers
43300821
Models
For model fitment information, see the P&A Retail Catalog or the Parts and Accessories section of www.harley-davidson.com (English only).
Kit Contents
See Figure 1 and Table 3
Installation Requirements
NOTE
This instruction sheet references service manual information. A service manual for your model motorcycle is required for this installation and is available from a Harley-Davidson dealer.
WARNING
Rider and passenger safety depend upon the correct installation of this kit. Use the appropriate service manual procedures. If the procedure is not within your capabilities or you do not have the correct tools, have a Harley-Davidson dealer perform the installation. Improper installation of this kit could result in death or serious injury. (00333b)
Proper installation of this kit requires the separate purchase of the following parts which are available at a Harley-Davidson dealer:
Table 1. Front Disc Hardware
Brake Disc
Hardware
Floating (Qty 2) (Part No. 41500195)
Stock disc screws (Qty 10) (Part No. 41500020)
Table 2. Specified Tire Combination
Kit Installation
Specified Tire
Front Tire Part No.
2021 and later Pan America
Michelin Scorcher
43100042
Michelin Anakee Wild
43100049
PREPARE
1. Remove existing front wheel assembly. See service manual.
a. Retain axle, axle nut, and wheel spacers.
b. Discard Original Equipment (OE) brake discs.
INSTALLATION
NOTE
If vehicle is not equipped with Tire Pressure Monitoring System (TPMS), install valve stem (40999-87) included in the installation kit.
If equipped with TPMS, reuse valve stem.
1. See Figure 1. Install valve stem assembly on wheel (1). See service manual.
NOTICE
Do not re-use brake disc/rotor screws. Re-using these screws can result in torque loss and damage to brake components. (00319c)
2. Assemble wheel installation, kit components and new brake disc(s) to wheel, using the appropriate service parts table. See the service manual.
a. Install ABS bearing first. Red side against the wheel.
b. ABS bearing is installed in the left wheel hub. Defined by the wheel directional arrow.
c. Install regular bearing lettered side away from wheel.
3. When installing tire, ensure protective covers are installed on the tire mounting machine to avoid paint chipping.
COMPLETE
1. Install previously removed wheel spacers. See service manual.
2. Install front wheel, stock axle and stock axle nut. See service manual.
SERVICE PARTS
Figure 1. Service Parts: Front Wheel Kit
Table 3. Service Parts and Wheel Kit Contents
Kit
Item
Description (Quantity)
Part Number
43300821
1
Wheel
Not Sold Separately
Table 4. Front 25 mm Bearing ABS Wheel Installation Kit (42400038)
Front 25 mm Bearing ABS Wheel Installation Kit (42400038)
Item Quantity Used and Description
Fitment
Wheel Size
A
B
C
D
E
2021 and later Pan America
19 x 3.0 in
1
1
1
1
1
Installation kits are designed to work with many different wheel styles and fitments. Contact a Harley-Davidson dealer to verify that the wheel and installation kits are both designed and approved for the motorcycle they are being installed on.
A
Bearing, Regular
9276B
B
Bearing, ABS
9252A
C
Axle Sleeve
43300600
D
Valve Stem, Pull Thru
40999-87
E
Valve Stem, Cap
41123-79