Kits | Suggested Tools | Skill Level(1) |
---|---|---|
93100074 | Safety Glasses | 1 Dark wrench
|
Verify that all contents are present in the kit before installing or removing items from vehicle. | |||||
---|---|---|---|---|---|
Item | Qty | Description | Part No. | Notes | |
1 | 1 | Travel cover, medium | Not sold separately | ||
2 | 1 | Travel cover bag | Not sold separately |
1. | Park vehicle with steering turned to left. |
1. | Figure 2 Drape cover over bike, positioning front over handlebars and windshield (if present). | |
2. | Figure 3 Pull cover tight over rear of bike. a. Rear fender, lights or license plate (varies by model). b. Limit cover contacting seating surface. c. Cover can go through or over backrest (if present). | |
3. | Figure 4 Attach front elastic cords to each other under steering head. Use plastic clips. | |
4. | Attach elastic cords (1 per side) over any convenient attachment points. | |
5. | Elastic cords can be relocated to other holes along edge of cover for better fit. a. If necessary, shorten cords by adding additional knots or retying existing knots. | Figure 2. Side Coverage (typical) Figure 3. Rear Coverage (typical) Figure 4. Down Tube Under Steer Head Tie Down Figure 5. Brake Pedal Tie Down Figure 6. Shifter Tie Down Figure 7. Rider Foot Peg Tie Down Figure 8. Passenger Foot Peg Tie Down |
1. | When installed cover should have slope to keep water from collecting above the seat area. |
1. | Brush off normal dirt with cloth. | |
2. | Spot clean with warm water and mild detergent. Use sponge or terry cloth. | |
3. | Cover should be thoroughly dried before use. |