RETRACTABLE CABLE LOCK
941003232022-01-17
GENERAL INFORMATION
Table 1. General Information
Kits | Suggested Tools | Skill Level(1) |
|---|---|---|
92800018 | N/A |  1 Dark wrench
|
(1) Only simple tools and techniques required
KIT CONTENTS
Figure 1. Kit Contents: Retractable Cable Lock
Table 2. Kit Contents: Retractable Cable Lock
 | Verify that all contents are present in the kit before installing or removing items from vehicle. | ||||
|---|---|---|---|---|---|
Item | Qty | Description | Part No. | Notes | |
 | 1 | 1 | Retractable cable lock | 92800018 | |
GENERAL
Models
For model fitment information, see the Parts and Accessories (P&A) Retail Catalog or the Parts and Accessories section of www.harley-davidson.com.
Verify that the most current version of the instruction sheet is used. It is available at: h-d.com/isheets
Contact Harley-Davidson Customer Support Center at 1-800-258-2464 (U.S. only) or 1-414-343-4056.
SET NEW COMBINATION
| 1. | Figure 2 Rotate dials (3) to 0-0-0-0 with alignment arrows (6). | |
| 2. | Press cable button (7) to make sure cable is fully retracted into lock body. | |
| 3. | Press reset button (1) while pressing down cable head (2) until it stops in lock body. a. Cable head (2) should lower into lock body: Dimension: 3 mm (0.125 in) | |
| 4. | Rotate dials (3) with alignment arrows to set new combination. | |
| 5. | Press cable button (7) and pull out cable head (2) a few inches or centimeters. Your new combination is now set. | |
| 6. | Press cable button (7) to retract cable into lock body. |
| 1 | Reset button |
| 2 | Cable head |
| 3 | Dial (4) |
| 4 | Locking hole |
| 5 | Opening button |
| 6 | Alignment arrow (2) |
| 7 | Cable button |
Figure 2.
OPERATION
Lock
| 1. | Figure 2 Rotate dials (3) to preset combination. | |
| 2. | Press cable button (7). | |
| 3. | Pull cable head (2) to desired length. | |
| 4. | Secure item. | |
| 5. | Install cable head (2) into locking hole (4). | |
| 6. | Rotate dials (3) to lock. |
Unlock
| 1. | Figure 2 Rotate dials (3) to preset combination. | |
| 2. | Press opening button (5) to release cable head (2). | |
| 3. | Press cable button (7) to retract cable. |
COMBO SAFE
For as long as the customer owns the lock, if combination is lost and it has been registered with Kryptonite, call Kryptonite to obtain combination. If combination changes after registration, please be sure to update registration with Kryptonite. To register combination, complete form on Kryptonite’s website at Kryptonitelock.com