SINGLE-SIDED SWINGARM BAG
941003442023-01-09
GENERAL INFORMATION
Table 1. General Information
Kits | Suggested Tools | Skill Level(1) |
|---|---|---|
90202530, 90202531 | Safety Glasses, Torque Wrench |  |
(1) Tightening to torque value or other moderate tools and techniques required
KIT CONTENTS
Figure 1. Kit Contents: Aggressive Edge Footpegs - Rider
Table 2. Kit Contents: Rider Footpegs Kit
 | Verify that all contents are present in the kit before installing or removing items from vehicle. | ||||
|---|---|---|---|---|---|
Item | Qty | Description | Part No. | Notes | |
 | 1 | 1 | Saddlebag, classic | Not sold separately | |
| 2 | 1 | Saddlebag, modern | Not sold separately | |
| 3 | 1 | Dry bag | 90202705 | |
| 4 | 1 | Organizer | 90202704 | |
GENERAL
Models
For model fitment information, see the Parts and Accessories (P&A) Retail Catalog or the Parts and Accessories section of www.harley-davidson.com.
Verify that the most current version of the instruction sheet is used. It is available at: h-d.com/isheets
Contact Harley-Davidson Customer Support Center at 1-800-258-2464 (U.S. only) or 1-414-343-4056.
Installation Requirements
WARNINGRider and passenger safety depend upon the correct installation of this kit. Use the appropriate service manual procedures. If the procedure is not within your capabilities or you do not have the correct tools, have a Harley-Davidson dealer perform the installation. Improper installation of this kit could result in death or serious injury. (00333b)
- Nightster (RH975): Separate purchase of Saddlebag Mounting Bracket Kit (Part No. 90202532) is required for this installation.
- Sportster S (RH1250S): Separate purchase of Saddlebag Mounting Bracket Kit (Part No. 90202533) is required for this installation.
These items are available at your local Harley-Davidson dealership.
Maintenance
WARNINGDo not exceed swingarm bag weight capacity. Too much weight in swingarm bag can cause loss of control, which could result in death or serious injury. (00618c)
Use the Leather Care from the kit regularly to preserve the appearance and extend the life of the swingarm bag. Additional leather care products are available from a Harley-Davidson dealer or see customer care card that came with the product.
INSTALL
| 1. | Figure 2 Align mounting bracket to holes (1 or 2) of saddlebag. a. Nightster (RH975): Hole 1. b. Sportster S (RH1250S): Hole 2. | |
| 2. | Install saddlebag to swingarm mounting bracket. a. See mounting bracket instructions for screw installation and torque procedure. |
| 1 | Nightster (RH975) |
| 2 | Sportster S (RH1250S) |
Figure 2. Mounting Bracket Hole Locations (Looking Inside)